Hardline Products
What's covered in a Product Inspection for Hardline Products?
AsiaSQE's general on-site checklist for During Production Inspections includes the following criteria
- Quantity status
- Size & Measurements
- Product appearance
- Weight
- Performance, safety & function tests
- Assortment
- Critical Components
- Carton status
- Assembly
- Barcode scan test
- Accessories
- Packing
- Material
- Marking
- Colors
- Shipping Marks
- Logo & Labeling
- Factory View
Besides the above, we can carry out a tailor-made inspection according to your criteria.
Hardline common defects found during product inspections
Function
- Noise
- Wobble
- Can't open
- Wheel block
- Poor assembly
Appearance
- Rust mark
- Burr mark
- Chip / Crack
- Color / Oil stain
- Poor electro-printing
Specification
- Misalignment
- Tipping over
- Slanted holes
- Wrong component size
- Wrong accessories size
Safety
- Mildew
- Splinter
- Exposed nail
- Sharp point/edge
- Loose component
Packing
- Wrong marking
- Carton damage
- Missing component
- Incorrect instruction
- Empty space in cartons
Material
- Mold mark
- Deformed tube
- Wrong material
- Rough material
- Collapsing panel
Frequently Asked Questions
Why do I need shipment inspections?
If you are worried about or have experienced problems such as poor quality, incorrect shipments or unreal information from suppliers. If before placing orders or making final payments, you hope to have accurate understanding about the quality of the goods and reliability of the supplier. Shipment inspections and factory audit services are your solution for all these problems
How many days in advance should I book the inspection?
Though sometimes it's possible to book next-day inspections for some manufacturing clusters where AsiaSQE has a large team of inspectors, we recommend booking with us at least three days in advance.
Who will I be in contact with throughout the whole process?
One dedicated account manager will be assigned for all the upcoming inspection bookings
Do I need to send you an approved sample?
Approved samples are much recommended so that our engineer can have a clearer understanding about the product details in advance and take note of the points which we should pay attention to during the inspection. After that we will contact the factory and send the sealed samples for inspection reference.
How many days prior to shipment should the inspection take place?
The earlier the better considering that if the inspection report isn't satisfactory, the factory will have enough time to rework the defectives and ship the goods on time.
Can I discuss with you in details about my own inspection criteria?
Absolutely! Our checklists are flexible, and we encourage our customers to, before each inspection, send us their special requirements and own inspection criteria so we can add them to the checklist. Special requirements can also be added through the online booking system.
How long does it take to get my report?
The official report is reviewed and signed by a technical manager and made available for download within 24 hours after each inspection. However, we may send you a draft report which has basic remarks about the inspection, but does not include photos. In this way, you can know the result of the inspection without delay.
What if I have questions after I receive your report?
Our services do not stop once report is issued. Our team is always available to clarify each point of the report after each inspection, if necessary.
Quality Control Services for Hardline Products
AsiaSQE provides quality control services including product inspections and laboratory testing for a great variety of hardline products.
By AsiaSQE well-trained inspectors, there's a dedicated department for hardline products which is comprised of technical managers, inspection engineers, and audit specialists from the sector, who are teamed up to ensure that goods strictly adhere to buyers' agreed quality plan, drawings, and contractual specifications.
What are the products we inspect?
Furniture & Home Deco
Baby Products
Household Utensils
Toys & Gifts
Jewelry
Pet Products
Promotional & Party Products
Stationery
Sports & Traveling
Beauty & Personal Care Products
Softline Products
What's covered in a Product Inspection for Softline Products?
AsiaSQE's general on-site checklist for During Production Inspections includes the following criteria
- Quantity status
- Size & Measurements
- Product appearance
- Weight
- Performance, safety & function tests
- Assortment
- Critical Components
- Carton status
- Assembly
- Barcode scan test
- Accessories
- Packing
- Material
- Marking
- Colors
- Shipping Marks
- Logo & Labeling
Besides the above, we can carry out a tailor-made inspection according to your criteria.
Softline common defects found during product inspections
Function
- Poor Velcro
- Broken zippers
- Loose buttons
- Loose snaps
- Drawstring malfunction
Appearance
- Dirt / oil sports
- Needle holes
- Crease / pucker
- Exposed stuffing
- Broken embroidery
Specification
- Asymmetry
- Poor shape
- Wrong stitch density
- Wrong measurement
- Poor waterproof
- Wrong warp / weft density
- Wrong fabric / padding weight
- Knots
Safety
- Mildew
- Insects
- Blood spots
- Broken needle
- Loose accessories
Packing / Label
- Damaged carton
- Wrong labels / barcodes
- Poor printing of labels
- Empty space in cartons
- Wrong assortment
- Wrong shipping marks
Material
- Wrong color
- Strong / strange odor
- Rough texture
- Wrong pattern
- Incorrect material
Frequently Asked Questions
Why do I need shipment inspections?
If you are worried about or have experienced problems such as poor quality, incorrect shipments or unreal information from suppliers. If before placing orders or making final payments, you hope to have accurate understanding about the quality of the goods and reliability of the supplier. Shipment inspections and factory audit services are your solution for all these problems
How many days in advance should I book the inspection?
Though sometimes it's possible to book next-day inspections for some manufacturing clusters where AsiaSQE has a large team of inspectors, we recommend booking with us at least three days in advance.
Who will I be in contact with throughout the whole process?
One dedicated account manager will be assigned for all the upcoming inspection bookings
Do I need to send you an approved sample?
Approved samples are much recommended so that our engineer can have a clearer understanding about the product details in advance and take note of the points which we should pay attention to during the inspection. After that we will contact the factory and send the sealed samples for inspection reference.
How many days prior to shipment should the inspection take place?
The earlier the better considering that if the inspection report isn't satisfactory, the factory will have enough time to rework the defectives and ship the goods on time.
Can I discuss with you in details about my own inspection criteria?
Absolutely! Our checklists are flexible, and we encourage our customers to, before each inspection, send us their special requirements and own inspection criteria so we can add them to the checklist. Special requirements can also be added through the online booking system.
How long does it take to get my report?
The official report is reviewed and signed by a technical manager and made available for download within 24 hours after each inspection. However, we may send you a draft report which has basic remarks about the inspection, but does not include photos. In this way, you can know the result of the inspection without delay.
What if I have questions after I receive your report?
Our services do not stop once report is issued. Our team is always available to clarify each point of the report after each inspection, if necessary.
Quality Control Services for Softline Products
AsiaSQE provides quality control services including product inspections and laboratory testing for a great variety of softline products.
By AsiaSQE's well trained inspectors, there's a dedicated department for soft line products which is comprised of technical managers, inspection engineers and audit specialists from the soft line sector, who are teamed up to ensure that goods strictly adhere to buyers' agreed quality plan, drawings and contractual specification.
What are the products we inspect?
Men's Wear
Underwear / Swimwear
Women's Wears
Home Textiles
Fabrics
Sports & Traveling
Electrical & Electronic Products
What's covered in a Product Inspection for Electrical & Electronic Products?
AsiaSQE's general on-site checklist for During Production Inspections includes the following criteria
- Quantity status
- Size & Measurements
- Product appearance
- Weight
- Performance, safety & function tests
- Assortment
- Critical Components
- Carton status
- Assembly
- Barcode scan test
- Accessories
- Packing
- Material
- Marking
- Colors
- Shipping Marks
- Logo & Labeling
- Factory View
Besides the above, we can carry out a tailor-made inspection according to your criteria.
Electrical & Electronic common defects found during product inspections
Function
- Abnormal sound
- Screen flashing
- Battery cannot charge
- Bluetooth transmission
- GPS cannot position
- Malfunction of Wifi/3G/4G/5G
Appearance
- Gap
- Corrosion
- Dust in screen
- Bad pixel on screen
- Barcode scan test
- Light leakage
Construction
- Poor casing fit
- Poor reliability of jack
- Panel extrusion
- Power cable not fixed
- Enclosure drop off
- PVR/DVB-T2/C/T malfunction
Specification
- Wrong adapter voltage
- Incorrect resolution
- Low battery capacity
- Low memory capacity
- Wrong weight/size
Safety
- Hi-pot test failure
- High power consumption
- Poor cord attachment
- Overloading test failure
- Drop test failure
Packing
- Incorrect packaging
- Wrong markings
- Mislabeling
- Unreadable barcode
Frequently Asked Questions
Why do I need shipment inspections?
If you are worried about or have experienced problems such as poor quality, incorrect shipments or unreal information from suppliers. If before placing orders or making final payments, you hope to have accurate understanding about the quality of the goods and reliability of the supplier. Shipment inspections and factory audit services are your solution for all these problems
How many days in advance should I book the inspection?
Though sometimes it's possible to book next-day inspections for some manufacturing clusters where AsiaSQE has a large team of inspectors, we recommend booking with us at least three days in advance.
Who will I be in contact with throughout the whole process?
One dedicated account manager will be assigned for all the upcoming inspection bookings
Do I need to send you an approved sample?
Approved samples are much recommended so that our engineer can have a clearer understanding about the product details in advance and take note of the points which we should pay attention to during the inspection. After that we will contact the factory and send the sealed samples for inspection reference.
How many days prior to shipment should the inspection take place?
The earlier the better considering that if the inspection report isn't satisfactory, the factory will have enough time to rework the defectives and ship the goods on time.
Can I discuss with you in details about my own inspection criteria?
Absolutely! Our checklists are flexible, and we encourage our customers to, before each inspection, send us their special requirements and own inspection criteria so we can add them to the checklist. Special requirements can also be added through the online booking system.
How long does it take to get my report?
The official report is reviewed and signed by a technical manager and made available for download within 24 hours after each inspection. However, we may send you a draft report which has basic remarks about the inspection, but does not include photos. In this way, you can know the result of the inspection without delay.
What if I have questions after I receive your report?
Our services do not stop once report is issued. Our team is always available to clarify each point of the report after each inspection, if necessary.
Quality Control Services for Electrical & Electronic Products
AsiaSQE provides quality control services including product inspections and laboratory testing for a great variety of Electrical & Electronic products.
By AsiaSQE well-trained inspectors, there's a dedicated department for Electrical & Electronics which is comprised of technical managers, inspection engineers, and audit specialists from the sector, who are teamed up to ensure that goods strictly adhere to buyers' agreed quality plan, drawings, and contractual specifications.
What are the products we inspect?
Household Appliances
Heating/Cooling Appliances
Communications
Lifestyle & Wellness
Audio / HiFi / Surround
Wearable & Drones
Security & Accessories
IT Products
Components
Power Supplies
Industrial Products
Quality Control Services for Industrial Products
AsiaSQE provides quality control services including product inspections and laboratory testing for a great variety of industrial products.
By AsiaSQE well traind inspectors, there's a dedicated department for industrial products which is comprised of technical managers, inspection engineers and audit specialists from the hardline sector, who are teamed up to ensure that goods strictly adhere to buyers' agreed quality plan, drawings and contractual specification.
What are the products we inspect?
Metal Products
Boiler and Prime Power Equipment
Pressure Vessels and Piping
Production Equipment
Material Handling Equipment
Spare Parts, Components
Transportation
Pumps, Valves, Compressors
What's covered in a Product Inspection for Industrial Products?
AsiaSQE's general on-site checklist for During Production Inspections includes the following criteria
- Quantity status
- Size & Measurements
- Product appearance
- Weight
- Performance, safety & function tests
- Assortment
- Critical Components
- Carton status
- Assembly
- Barcode scan test
- Accessories
- Packing
- Material
- Marking
- Colors
- Shipping Marks
- Logo & Labeling
Besides the above, we can carry out a tailor-made inspection according to your criteria.
Industrial Products common defects found during product inspections
Function
- Malfunction
- Interference
- Out of control
- Abnormal sound
- No / wrong signal
Appearance
- Rust
- Crack
- Poor Printing
- Uneven gaps
- Color difference
- Paint peeling off
Specification
- False power
- Incorrect load
- Incorrect current
- Wrong sizes / weight
- Incorrect power consumption
Safety
- Hipot test failure
- Overloading test failure
- Distribution box without lock
- Cutting tool without protective door
- Radiation equipment without warning
Packing / Label
- Incorrect packing way
- Wrong marking
- Wrong labeling
- Unreadable barcode
- Insufficient packaging
Material
- Can't be assembled
- Wrong stainless steel
- Incorrect material purity
- Raw material with wrong size
- Mechanical properties not up to standard
Frequently Asked Questions
Why do I need shipment inspections?
If you are worried about or have experienced problems such as poor quality, incorrect shipments or unreal information from suppliers. If before placing orders or making final payments, you hope to have accurate understanding about the quality of the goods and reliability of the supplier. Shipment inspections and factory audit services are your solution for all these problems
How many days in advance should I book the inspection?
Though sometimes it's possible to book next-day inspections for some manufacturing clusters where AsiaSQE has a large team of inspectors, we recommend booking with us at least three days in advance.
Who will I be in contact with throughout the whole process?
One dedicated account manager will be assigned for all the upcoming inspection bookings
Do I need to send you an approved sample?
Approved samples are much recommended so that our engineer can have a clearer understanding about the product details in advance and take note of the points which we should pay attention to during the inspection. After that we will contact the factory and send the sealed samples for inspection reference.
How many days prior to shipment should the inspection take place?
The earlier the better considering that if the inspection report isn't satisfactory, the factory will have enough time to rework the defectives and ship the goods on time.
Can I discuss with you in details about my own inspection criteria?
Absolutely! Our checklists are flexible, and we encourage our customers to, before each inspection, send us their special requirements and own inspection criteria so we can add them to the checklist. Special requirements can also be added through the online booking system.
How long does it take to get my report?
The official report is reviewed and signed by a technical manager and made available for download within 24 hours after each inspection. However, we may send you a draft report which has basic remarks about the inspection, but does not include photos. In this way, you can know the result of the inspection without delay.
What if I have questions after I receive your report?
Our services do not stop once report is issued. Our team is always available to clarify each point of the report after each inspection, if necessary.